manualshive.com logo in svg

HP Vectra XU 6/XXX, User Manual

Share
Download
HP Vectra XU 6/XXX User Manual Download Page 116

4   Troubleshooting Your PC and Using the Setup Program

Using the HP Setup Program

104

English

 

•

Send Start Unit Command

This option is not supported by some SCSI devices. Some SCSI 
devices require a jumper to be changed before they can respond to 
this command.
When set to 

Yes

 this option reduces the load on your computer’s 

power supply by allowing the interface to power-up SCSI devices 
one-at-a-time when you start your computer. When set to 

No

 each 

SCSI device powers up at the same time.

Advanced Configuration 
Options Menu

It is recommended that these settings not be changed.

Use the 

 and 

 keys to move between options. Press 

 to 

display a menu with a selection of values. 

•

Plug and Play Scam Support

When enabled, this option automatically configures Plug and Play 
compatible SCSI devices. For SCSI devices that do not support Plug 
and Play, set this option to 

Disabled

. By default, it is enabled.

•

Interface BIOS

The Interface BIOS is enabled by default.

SCSISelect(TM) Utility v1.xxx

Advanced Configuration Options

Plug and Play Scam Support .................................. Enabled

Options Listed Below Have NO EFFECT if the BIOS is Disabled

Interface BIOS (Configuration Utility Reserves BIOS Space) .. Enabled
Support Removable Disks Under BIOS as Fixed Disks ........... Boot Only
Extended BIOS Translation for DOS Drives > 1 GByte .......... Enabled
Display <F6> Message During BIOS Initialization ............. Enabled
Multiple Lun Support ........................................ Disabled
BIOS Support for More Than 2 Drives (MS-DOS 5.0 and above) .. Enabled

Arrow keys to move cursor, <Enter> to select option, <Esc> to exit

Summary of Contents for Vectra XU 6/XXX









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands