manualshive.com logo in svg

HP Vectra XU 6/XXX, User Manual

Share
Download
HP Vectra XU 6/XXX User Manual Download Page 6

   

vi

English

Important Safety Information

If you have any doubt that you can lift the PC or display safely, do not 
try to move it without help. 

For your safety, always connect the equipment to a grounded wall 
outlet. Always use a power cord with a properly grounded plug, such as 
the one provided with this equipment, or one in compliance with your 
national regulations. This PC is disconnected from the power by 
removing the power cord from the power outlet. This means the PC 
must be located close to a power outlet that is easily accessible.

For your safety, never remove the PC’s cover without first removing the 
power cord from the power outlet, and any connection to a 
telecommunications network. Always replace the cover on the PC 
before switching it on again.

WARNING

To avoid electric shock, do not open the power supply.

This HP PC is a class 1 laser product. Do not attempt to make any
adjustment of the laser units.

Important Ergonomic Information

It is strongly recommended that you read the ergonomic information 
before using your PC. See “Working in Comfort” on page 16. 

Summary of Contents for Vectra XU 6/XXX









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands