manualshive.com logo in svg

HP t505, Troubleshooting Manual

The HP t505, a versatile device, is a Product End-Of-Life Disassembly Instructions manual that provides step-by-step instructions on disassembling the product. This essential guide can be easily downloaded for free from manualshive.com, ensuring users can safely dismantle their HP t505.

Share
Download
background image

Description

The HP FTP Image Update Client can only be run by an administrator on an HP thin client system
which has license to run XP Embedded operating system.

Host Settings

There are two ways to specify host settings:

1.

You can manually enter settings by clearing the 

Get Host Settings from DHCP server

 check

box and filling in appropriate information to the 

Host ID

, 

Path

, 

User ID

, and 

Password

 boxes.

If the FTP share allows anonymous read access, then you can leave the 

User ID

 and 

Password

boxes empty.

If the WES images and WinPE image are stored in the default (root) folder on the FTP server,
then you can leave the 

Path

 box empty or fill the box with 

/

.

2.

Automatically through a DHCP option by selecting the 

Get Host Settings from DHCP server

check box.

These host settings can be saved and committed by clicking on the 

Save Settings

 button. When the

applet is invoked again, the settings will be retrieved and the corresponding controls are automatically
populated.

Description

57

Summary of Contents for t505








































































Reviews:

No comments

Related manuals for t505

Brands by name

Popular brands

Load more brands