HP Surestore E Tape Library Model 2/20 User Manual Download Page 199

Page: 199 / 238

Appendix

Support Services 197

Appendix B

Support Services

HP support services upgrade and/or extend the warranty on your tape library.

A wide range of service options are available to meet your business uptime

needs.

SupportPacks

SupportPacks are available

within

180 days of your purchase. If you choose to

purchase one, your warranty will be upgraded. Once your warranty has

expired, post-warranty SupportPacks are also available.

Table 43

on page 198 lists HP SupportPack service options.

Note

To order HP SupportPacks, visit http://www.hp.com/hps/

support/supportpack, or contact your support or sales

representative.

Summary of Contents for Surestore E Tape Library Model 2/20














































































































































































































































Search results

Summary of Contents for Surestore E Tape Library Model 2/20

Reviews:

Related manuals for Surestore E Tape Library Model 2/20

Brands by name

Popular brands

HP Surestore E Tape Library Model 2/20, User Manual

Search results

Summary of Contents for Surestore E Tape Library Model 2/20

Reviews:

Related manuals for Surestore E Tape Library Model 2/20

Brands by name

Popular brands