manualshive.com logo in svg

HP Stream Laptop PC 14, Maintenance And Service Manual

Share
Download
HP Stream Laptop PC 14 Maintenance And Service Manual Download Page 44

5.

If it is necessary to replace the webcam/microphone module:

a.

Detach and lift the module (1) from the display back cover. (The webcam/microphone module is 
attached to the display back cover with double-sided adhesive.)

b.

Disconnect the webcam/microphone module cable (2) from the module.

The webcam/microphone module is available using spare part number 766523-025.

6.

If it is necessary to replace the display panel:

a.

Remove the four Phillips PM2.0×3.0 screws (1) that secure the display panel to the 
display back cover.

CAUTION:

Before turning the display panel upside down, make sure the work surface is clear of 

tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to 
the display panel.

36

Chapter 5   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for Stream Laptop PC 14






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands