manualshive.com logo in svg

HP Stream Laptop PC 14, Maintenance And Service Manual

Share
Download
HP Stream Laptop PC 14 Maintenance And Service Manual Download Page 39

Speakers

Description

Spare part number

Speakers (includes cable)

905565-001

Before removing the speakers, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 23

).

5.

Remove the battery (see 

Battery on page 24

).

Remove the speakers:

1.

Disconnect the speaker cable (1) from the system board.

2.

Lift the speakers from the computer (2).

Reverse this procedure to install the speakers.

Component replacement procedures

31

Summary of Contents for Stream Laptop PC 14






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands