manualshive.com logo in svg

HP Stream Laptop PC 14, Maintenance And Service Manual

Share
Download
HP Stream Laptop PC 14 Maintenance And Service Manual Download Page 11

2

External component identification

Display

Component

Description

(1)

Camera light

On: The camera is in use.

(2)

Camera

Allows you to video chat, record video, and record still images.

(3)

Internal microphone

Records sound.

(4)

WLAN antennas* (1 or 2 depending on model)

Send and receive wireless signals to communicate with wireless local 
area networks (WLANs).

*The antennas are not visible from the outside of the computer, and antenna location varies. For optimal transmission, keep the areas 
immediately around the antennas free from obstructions.

For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or 
region.

To access this guide:

▲

Select the Start button, select All apps (required on some products), select HP Help and Support, and then select HP 
Documentation.

Display

3

Summary of Contents for Stream Laptop PC 14






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands