manualshive.com logo in svg

HP Stream Laptop PC 14, Maintenance And Service Manual

Share
Download
HP Stream Laptop PC 14 Maintenance And Service Manual Download Page 13

Component

Description

▲

Pull the card out of the memory card reader.

(7)

Power light

●

On: The computer is on.

●

Blinking: The computer is in the Sleep state, a power-
saving state. The computer shuts off power to the display 
and other unneeded components.

●

Off: The computer is off or in Hibernation. Hibernation is a 
power-saving state that uses the least amount of power.

Right side

Component

Description

(1)

 

AC adapter and battery light

●

White: The AC adapter is connected and the battery is fully 
charged.

●

Blinking white: The AC adapter is disconnected and the 
battery has reached a low battery level.

●

Amber: The AC adapter is connected and the battery is 
charging.

●

Off: The battery is not charging.

(2)

Power connector

Connects an AC adapter.

Front

Component

Description

Speakers (2)

Produce sound.

Right side

5

Summary of Contents for Stream Laptop PC 14






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands