manualshive.com logo in svg

HP Stream Laptop PC 14, Maintenance And Service Manual

Share
Download
HP Stream Laptop PC 14 Maintenance And Service Manual Download Page 36

RTC battery

Description

Spare part number

RTC battery

857380-001

Before removing the RTC battery, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 23

).

5.

Disconnect the battery cable from the system board (see 

Battery on page 24

).

To remove the RTC battery:

▲

Disconnect the RTC battery cable from the system board (1), and then lift the RTC battery from the 
computer (2).

NOTE:

The RTC battery is secured with double-sided tape.

Reverse this procedure to install the RTC battery.

28

Chapter 5   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for Stream Laptop PC 14






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands