HP StoreOnce 4900 Backup, Installation And Configuration Manual

Page: 105 / 124

Off = UID LED is disabled
Green = System health is good 3. Internal health LED
Off = System is off
Amber = Enclosure requires service check: I/O, fan and
power supply LEDs, and AC power cables to power
supplies. 4. GSI LED
Off = Enclosure is functioning normally.
Rear view of the disk enclosure
Figure 26 Rear view of the disk enclosure LEDs
Status Description Item
Green = On Power On/Standby button and
system power LED 1
Amber = Standby (auxiliary power present)
Off = Off
Green = System health is good. Internal Health LED 2
Off = System is off.
Amber = Enclosure requires service check: I/O, fan and power
supply LEDs, and AC power cables to power supplies. GSI LED* 3
Off = Enclosure is functioning normally.
Blue = UID LED is enabled from the UID button. UID button/LED (Drawer 2) 4
Blue flashing = System is in hard drive locate mode or an enclosure
firmware update is in progress.
Off = UID LED is disabled.
Green = Power on and power supply functioning properly Power supply LED 5
Off = One or more of the following conditions exists:
•
System powered off
•
AC power unavailable
Rear view of the disk enclosure 105