HP StorageWorks MSA 2/8 - SAN Switch Installation Manual Download Page 57

Page: 57 / 72

Backing Up Configuration Data and Upgrading Firmware

MSA SAN Switch 2/8 Installation Guide

2. Locate the panel for this switch and view the display.

If necessary, click the Detail View button to display more information.

The following information is displayed for the switch:

■

Name

■

Fabric OS version

■

Domain ID

■

Ethernet IP

■

Ethernet Mask

■

FCnet IP

■

FCnet Mask

■

Gateway IP

■

WWN

Performing a Firmware Upgrade through Web Tools

To download the latest version of the firmware on the switch:

1. Download the firmware from the HP website at

http://www.hp.com

Go to the Support page for the required loaders and instructions.

2. Access Web Tools.

3. Click the Admin icon button (next to the switch panel display) to go to the

Administrative Interface.

At the prompt, enter a user name and password with administrative privileges
and click OK.

The Administrative Interface is displayed, with the Switch Settings tab
selected by default.

4. Select the Firmware Upgrade (Firm Upgrd) tab.

The Firmware Upgrade page is displayed.

Figure 12

is an illustration of this Firmware Upgrade page.

Summary of Contents for StorageWorks MSA 2/8 - SAN Switch









































































Search results

Summary of Contents for StorageWorks MSA 2/8 - SAN Switch

Reviews:

Brands by name

Popular brands

HP StorageWorks MSA 2/8 - SAN Switch, Installation Manual

Search results

Summary of Contents for StorageWorks MSA 2/8 - SAN Switch

Reviews:

Brands by name

Popular brands