manualshive.com logo in svg

HP StorageWorks MSA 2/8 - SAN Switch, Installation Manual

Share
Download
HP StorageWorks MSA 2/8 - SAN Switch Installation Manual Download Page 12

About this Guide

12

MSA SAN Switch 2/8 Installation Guide

Getting Help

If you have a question after reading this guide, contact an HP authorized service 
provider or access our website at 

http://www.hp.com

.

HP Technical Support

In North America, call technical support at 1-800-652-6672, available 24 hours a 
day, 7 days a week.

Note:  

For continuous quality improvement, calls may be recorded or monitored.

Outside North America, call technical support at the nearest location. Telephone 
numbers for worldwide technical support are listed on the HP website under 
support at 

http://www.hp.com

.

Be sure to have the following information available before calling:

■

Technical support registration number (if applicable)

■

Product model names, numbers, and serial numbers

■

Exact text of any applicable error messages

■

Operating system type and revision level

■

Detailed, specific questions

HP Storage Website

The HP website has the latest information on this product, as well as the latest 
drivers. Access storage at 

http://www.hp.com

. From this website, select the 

appropriate product or solution.

HP Authorized Reseller

For the name of your nearest HP authorized reseller:

■

In the United States, call 1-800-345-1518

■

In Canada, call 1-800-263-5868

■

Elsewhere, see the HP website for locations and telephone numbers at 

http://www.hp.com

.

Summary of Contents for StorageWorks MSA 2/8 - SAN Switch









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands