manualshive.com logo in svg

HP StorageWorks MSA 2/8 - SAN Switch, Installation Manual

Share
Download
HP StorageWorks MSA 2/8 - SAN Switch Installation Manual Download Page 54

Backing Up Configuration Data and Upgrading Firmware

54

MSA SAN Switch 2/8 Installation Guide

Upgrading or Restoring the Switch Firmware

The MSA SAN Switch ships with preloaded firmware. In most cases, it is not 
necessary to update the firmware on a new switch.

The firmware version can be obtained and downloaded as follows:

■

Downloading New Switch Firmware through the CLI

■

Downloading New Switch Firmware through Web Tools

Each of these methods is discussed in the following sections.

Note:  

All switches in the fabric must be running the same version of the firmware. If 

you upgrade the firmware on one switch, you must upgrade all switches.

Downloading New Switch Firmware through the CLI

Before you upgrade the firmware on your switch, verify the version of the 
firmware you are currently using.

Determining Your Firmware Version through the CLI

To view the current version of the firmware on the switch:

1. Log on to the switch as the admin user.

2. At the command line, enter:

VERSION

The system displays the Kernel version, Fabric Operating System release 
number, and other information about the firmware.

Summary of Contents for StorageWorks MSA 2/8 - SAN Switch









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands