Chapter 1. Initial Setup
•
Ship group kit, containing:
•
HAFM appliance.
•
Ten (10) square alignment washers (required for rack-mounting in HP 9000, 10000
and 11000 series racks).
•
HAFM application CD-ROM.
•
HAFM boot/restore CD-ROM.
•
Norton AntiVirus CD-ROM.
•
Modem cable with RJ-11 connectors.
•
CD-RW (blank).
•
HAFM Release Notes.
•
10–ft. Ethernet cable.
•
PDU power cord.
•
110–volt AC power cord.
•
Null modem cable.
•
Modem phone cable.
•
Generic documentation for the HAFM appliance.
•
Rack-mount hardware kit, containing:
•
Two (2) rear brackets (short) that attach to the cabinet (3.0 inches).
•
Two (2) optional rear brackets (long) that attach to the cabinet (15.25 inches).
•
One (1) left slide rail that attaches to the appliance (19.25 inches).
•
One (1) right slide rail that attaches to the appliance (19.25 inches).
•
Two (2) two-hole bar nuts for bolting the front and rear brackets together.
•
Four (4) three-hole bar nuts for attaching the brackets to the rack-mounting standards.
Figure
illustrates the front and rear brackets, slide rails, and bar nuts.
hp StorageWorks HA-Fabric Manager Appliance Installation
Guide
19
