Chapter 3. Configuration
Configuring Public LAN Addresses
Note
Before starting this procedure, ensure that the LAN 1 interface is physically connected to the LAN.
An LCD display of 0.0.0.0 indicates a physical LAN connection is not present.
You can configure the public LAN connection (LAN 1) using one of the following methods:
•
Use Dynamic Host Control Protocol (DHCP) to assign the HAFM server IP address,
subnet mask, and default gateway IP address. You can either auto-detect or manually
select the DNS server IP address.
•
Manually enter the HAFM server IP address, subnet mask, default gateway IP address, and
DNS server IP address.
Configuring Public LAN Addresses Using DHCP
To configure TCP/IP network information for the private LAN connection (LAN 1):
Note
Before starting this procedure, ensure that the LAN 1 interface is physically connected to the LAN.
An LCD display of 0.0.0.0 indicates a physical LAN connection is not present.
1.
At the LCD panel, press ENTER. The Welcome!! or operational information message
changes to the following (
Figure 3.4. LCD Panel (Password Entry)
2.
Using the
button to increment a digit, the
button to decrement a digit, the
button
to move the cursor left, and the
button to move the cursor right, input the default
password (
9999
), then press ENTER. The
LAN 1 Setting??
message displays
at the LCD panel.
hp StorageWorks HA-Fabric Manager Appliance Installation
Guide
37
