HP StorageWorks ESL E-Series, User Manual

Page: 182 / 188

Glossary
182 ESL E-Series Tape Library User’s Guide
PCI
The PCI bus typically runs at speeds of 33 MHz or 66 MHz and is usually 32 bits
wide. This means that it passes 32 bits of data simultaneously as if down 32
separate wires. Some of the most recent computers include wider 64-bit PCI
buses, and already certain very high-end video capture cards offer improved
performance if connected to a 64-bit PCI bus.
Picker
A mechanical component of the extension axis assembly (robotics) which grips
and holds a tape cartridge in transit
Robotics
As used in the context of automated tape libraries; the X-axis, Y-axis, and Z-axis
mechanical assemblies inside the library used to move tape cartridges.
RS-232C
Short for Recommended Standard-232C, a standard interface approved by the
Electronic Industries Association (EIA) for connecting serial devices. This
standard is for asynchronous transfer between computer equipment and
accessories. Data is transmitted bit by bit in a serial fashion. The RS-232 standard
defines the function and use of all 25 pins of a DB-25 type connector.
SCSI
Small Computer System Interface. An American National Standards Institute
(ANSI) communications standard for attaching peripheral equipment to
computers.
SCSI ID
A unique address (0 to 15) assigned to each device on a SCSI bus.
SCSI-2
A second generation SCSI interface which includes command sets for magnetic
and optical disks, tapes, printers, processors, CD-ROMs, scanners, medium
changers, and communication devices.
SDLT
Super Digital Linear Tape is a Quantum tape drive and tape cartridge specification
offered in three ranges of capacity and transfer rates for workgroup, mid-range,
and enterprise needs.
SNMP
Short for Simple Network Management Protocol, a set of protocols for managing
complex networks.
Take-up leader
The ring at the beginning of a tape in a cartridge.