HP StorageWorks ESL E-Series, User Manual

Page: 142 / 188

Sense Data Values
142 ESL E-Series Tape Library User’s Guide
4 83 See
Table 25
EXTENSION HARDWARE FAILURE
■
Remove any obstructions.
■
Run the Robotics Self Test from the OCP.
4 84 See
Table 25
VERTICAL HARDWARE FAILURE
■
Remove any obstructions.
■
Run the Robotics Self Test from the OCP.
4 85 See
Table 25
HORIZONTAL HARDWARE FAILURE
■
Remove any obstructions.
■
Run the Robotics Self Test from the OCP.
4 87 See
Table 25
DEPTH HARDWARE FAILURE
■
Remove any obstructions.
■
Run the Robotics Self Test from the OCP.
4 88 00
WARNING SAFE TEMPERATURE EXCEEDED
This is only a warning that the temperature in the library exceeds the
normal operational temperature 40
oC
(104
o
F).
4 88 01
MAXIMUM TEMPERATURE EXCEEDED
The robot in the cabinet that has overheated turns off and remains off
until the temperature returns to an acceptable level. For LTO, the
acceptable level is 52
o
C (127
o
F); for SDLT, the acceptable level is 49
o
C
(120
o
F).
■
Check whether the air filters need to be replaced.
■
Check for fan failure.
■
Lower the ambient temperature.
4 89 00-FF
VISION HARDWARE FAILURE
Vision internal failure.
4 8A 02
CALIBRATION FAILURE
Check slots, cartridges, targets, and all internal elements. Verify that the
panels are properly seated and that doors are closed.
Table 24: Sense data values (Hexadecimal) (Continued)
Sense
Key ASC ASCQ Message Name/Description