manualshive.com logo in svg

HP StorageWorks e1200-160, User Manual

The HP StorageWorks e1200-160 is a high-performance storage system offering robust data management capabilities. Get started quickly with the included Quick Start Manual, available for free download from our website. This comprehensive manual ensures effortless installation and seamless integration, empowering you to maximize the potential of your storage device.

Share
Download
background image

Basic Troubleshooting

153

Network Storage Router e1200-160

LED Indicators

The LED indicators on the router are useful for diagnosing various problems:

■

The Fibre Channel port LEDs indicates Fibre Channel activity and link 
status. If one of these indicators does not light or stays continually lit without 
any corresponding SCSI bus activity, it may indicate a problem with the Fibre 
Channel link. Verify the Fibre Channel configuration.

■

The SCSI bus LEDs indicates SCSI activity. These indicators are lit during 
power up, configuration, and when the unit is transferring data. If the SCSI 
indicator stays continually lit without any corresponding Fibre Channel LED 
activity, it may indicate a problem with the SCSI bus configuration. Verify 
the SCSI bus configuration.

■

The Ethernet LEDs indicates activity and link status. If one of these indicators 
does not light or stays continuously lit, it may indicate a problem with the 
network connection. Verify the network connection. The port must be 
connected to a 10/100BaseT Ethernet network to function properly.

Additional information on the specific LEDs is available in Chapter 1, "

External 

Features Overview

." 

For an illustration of the router components and LED locations, see 

Figure 80

. 

Figure 80:  Router illustration

Table 10:  Router illustration components

Item

Description

1

Power LED

2

Serial RJ-11 connector

3

Ethernet RJ-45 connector

4

Fibre Channel activity LED

5

Fibre Channel link LED

6

Fibre Channel Port

Summary of Contents for StorageWorks e1200-160









































































































































































































Reviews:

No comments

Related manuals for StorageWorks e1200-160

D-Link DI-634M Quick Installation Manual preview
DI-634M
Brand: D-Link Pages: 12
Vivotek FE9181-H Quick Installation Manual preview
FE9181-H
Brand: Vivotek Pages: 170
Delta Electronics DTE-20T Instruction Sheet preview
DTE-20T
Brand: Delta Electronics Pages: 1
TRENDnet TW-100 Specifications preview
TW-100
Brand: TRENDnet Pages: 2
Weidmuller IE-SW-VL16-14TX-2SC Hardware Installation Manual preview
IE-SW-VL16-14TX-2SC
Brand: Weidmuller Pages: 17
Idis DR-8400 Installation Manual preview
DR-8400
Brand: Idis Pages: 31
Toto Link IP04229 User Manual preview
IP04229
Brand: Toto Link Pages: 55
Schrack Technik HSERG245GS Instruction Sheet preview
HSERG245GS
Brand: Schrack Technik Pages: 2
Patton electronics IPLink 2802 Specifications preview
IPLink 2802
Brand: Patton electronics Pages: 2
Lanner NCA-1525 User Manual preview
NCA-1525
Brand: Lanner Pages: 78
NC-link NC-AP111 User Manual preview
NC-AP111
Brand: NC-link Pages: 20
VCS VIP 1000 User Manual preview
VIP 1000
Brand: VCS Pages: 118
Observint NVR16 Firmware User Manual preview
NVR16
Brand: Observint Pages: 117
QTech QSW-2900 User Manual preview
QSW-2900
Brand: QTech Pages: 406
VideoWave Adam Device User Manual preview
Adam Device
Brand: VideoWave Pages: 12
Beckhoff EK1122 Documentation preview
EK1122
Brand: Beckhoff Pages: 84
SmartBridges airPoint Nexus sB3210 User Manual preview
airPoint Nexus sB3210
Brand: SmartBridges Pages: 55
Linksys WRT330N - Wireless-N Gigabit Gaming Router Wireless User Manual preview
WRT330N - Wireless-N Gigabit Gaming Router Wireless
Brand: Linksys Pages: 92

Brands by name

Popular brands

Load more brands