Installing and Configuring the Director
58
Director 2/140 Installation Guide
Only the IP Address, Subnet Mask, and Gateway Address fields are
configurable.
Figure 18: HyperTerminal window
11. To change director network addresses, enter the following at the
C>
prompt
and press Enter.
ipconfig xxx.xxx.xxx.xxx.yyy.yyy.yyy.yyy.zzz.zzz.zzz.zzz
The IP address format is xxx.xxx.xxx.xxx. The subnet mask format is
yyy.yyy.yyy.yyy. The gateway address format is zzz.zzz.zzz.zzz. The octets
xxx, yyy, and zzz are decimals from 0 through 255. If a network address is to
remain unchanged, enter the current address in the respective field.
When the new network addresses are configured at the director, the message
Request completed OK
displays at the bottom of the HyperTerminal
window.
12. Choose Exit from the File drop-down menu. A HyperTerminal dialog box
displays, as shown in
.
Figure 19: HyperTerminal dialog box (1)
13. Click Yes. A second HyperTerminal dialog box displays, as shown in
.
