HP StorageWorks 2/140 - Director Switch Installation Manual Download Page 105 | Manualshive

Page: 105 / 128

background image

Managing Firmware Versions

105

Director 2/140 Installation Guide

Downloading a Firmware Version to a Director

This procedure downloads a selected firmware version from the HAFM appliance
library to a director managed by the open instance of the Element Manager. The
procedure applies to a director with two (redundant) CTP cards. The process
occurs concurrently without taking the director offline or disrupting operation.
The new firmware version takes effect when control is passed from the active to
the backup CTP card. Although director operation is not affected, name server,
alias server, and login server functions are momentarily unavailable during CTP
card switchover. Although traffic is not disrupted, the green port LEDs will flicker
or blink during the IPL portion of this operation as control is passed to the other
CTP card.

Note:

When downloading a firmware version, follow procedural information in the

release notes that accompany the firmware version. This information supplements

information provided in this general procedure.

Use these steps to download a firmware version to a director:

1. Open the HAFM application. The View All - HAFM 8 main window displays.

2. Before downloading firmware version XX.YY.ZZ to a director, ensure the

required, compatible version of the HAFM application is running on the
HAFM appliance. Refer to the release notes that shipped with HAFM.

a.

Choose Help >About. The About dialog box displays and lists the HAFM
application version. Click OK to close the dialog box.

b.

If required, install the correct version of the HAFM application.

3. Double-click the icon representing the director to which the firmware version

will be downloaded. The Hardware View page for the selected director
displays.

4. As a precaution to preserve director configuration information, complete the

data collection procedure as follows:

a.

Open the HAFM application. The View All - HAFM 8 main window
displays.

b.

Double-click the icon representing the director for which the
configuration file will be backed up. The Hardware View page for the
selected director displays.

«
...
103
104
105
106
107
...
»

Summary of Contents for StorageWorks 2/140 - Director Switch

































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

Brand: Q-See Pages: 33

Brand: M-Audio Pages: 32

GROUPWISE 7 - WEB ACCESS

Brand: Novell Pages: 110

BACKUP AND RECOVERY 10 SERVER FOR LINUX -

Brand: ACRONIS Pages: 14

Backup & Recovery 10 Advanced Editions

Brand: ACRONIS Pages: 10

Wireless PCI Adapter Driver

Brand: 2Wire Pages: 4

Brand: M-Audio Pages: 99

Brand: EverFocus Pages: 44

Brand: Pantone Pages: 12

AH0QXML - Lotus Domino Messaging

Brand: IBM Pages: 120

Tivoli and Cisco

Brand: IBM Pages: 516

VIAVOICE-SIMPLY DICTATION FOR MAC OS X

Brand: IBM Pages: 92

Brand: Tascam Pages: 13

Abbey Road RS56

Brand: Waves Pages: 13

PRD-07630-011 - Enterprise Server - PC

Brand: Blackberry Pages: 69

Samsung Mobile Navigator

Brand: Garmin Pages: 12

Nuvi 285WT - Automotive GPS Receiver

Brand: Garmin Pages: 12

Brand: Garmin Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands