HP ProLiant DL140 Server Setup and Installation Guide
46
4.
Be sure that a normal power up sequence has occurred to confirm that the system meets the
minimal hardware requirements and is powered up under normal operation. The system has
powered up successfully if:
a.
The front panel Power On/Off LED illuminates green.
b.
The fans start up.
c.
The monitor displays messages regarding server initialization.
d.
The operating system loads to complete the boot process.
If the problem persists, continue with the section, “Diagnosis Steps,” in this appendix.
Diagnosis Steps
If the server does not power up, or powers up but does not complete POST, answer the questions
in Table C-1 to determine appropriate actions based on the symptoms observed. According to the
answers provided, another table in this appendix will be referenced, which will outline possible
reasons for the problem, options available to assist in diagnosis, possible solutions, and list
references to other sources of information.
Table C-1: Diagnosis Steps
Question
The Next Step
Question 1: Is the front
panel Power On/Off
LED on
If no, go to Table C-2, and then continue to Question 2 if
the problem is not solved.
If yes, continue to Question 4.
Question 2: Is the front
panel Server Status
LED red?
If no, go to Table C-2, and then continue to Question 3 if
the problem is not solved.
If yes, continue to Question 4.
Question 3: Is anything
visible on the monitor?
If no, go to Table C-3.
If yes, video is available for diagnosis. Determine the next
action by observing POST progress and error messages.
NOTE: If the server attempts to load the operating system, go to “Problems After Initial
Startup” in this appendix.
All manuals and user guides at all-guides.com
