HP ProLiant DL140 Server Setup and Installation Guide
37
A
Regulatory Compliance Notices
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, the HP ProLiant
DL140 server is assigned a regulatory model number. The regulatory model number for this
product is: HSTNS-2100. This server regulatory model number can be found on the product label,
along with the required approval markings and information. When requesting certification
information for this product, always refer to this regulatory model number. This regulatory model
number should not be confused with the marketing name or model number for the ProLiant
DL140 server.
Federal Communications Commission Notice
Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has
established Radio Frequency (RF) emission limits to provide an interference-free radio frequency
spectrum. Many electronic devices, including computers, generate RF energy incidental to their
intended function and are, therefore, covered by these rules. These rules place computers and
related peripheral devices into two classes, A and B, depending upon their intended installation.
Class A devices are those that may reasonably be expected to be installed in a business or
commercial environment. Class B devices are those that may reasonably be expected to be
installed in a residential environment (i.e., personal computers). The FCC requires devices in both
classes to bear a label indicating the interference potential of the device as well as additional
operating instructions for the user.
The rating label on the device shows which class (A or B) the equipment falls into. Class B
devices have an FCC logo or FCC ID on the label. Class A devices do not have a FCC logo or
FCC ID on the label. Once the class of the device is determined, refer to the following
corresponding statement.
Class A Equipment
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which
case the user will be required to correct the interference at personal expense.
All manuals and user guides at all-guides.com