HP ProLiant DL140 Server Setup and Installation Guide
25
Inserting the Server into the Rack
CAUTION: To avoid destabilizing the rack, install multiple servers starting from the
bottom of the rack.
To insert the server into the rack:
1.
Align the rear end of the server rails on the sides of the server with the front end of the rack
rails.
WARNING: To avoid personal injury, press the rail release latches and slowly
slide the server into the rack. The rail release latches can pinch your fingertips.
2.
Insert the server fully into the rack (1), ensuring that the fixed server rails slide inside the
fixed rack rails.
CAUTION: Keep the server parallel to the floor when sliding the fixed server rails
into the slide rails. Tilting the server can damage the rails.
3.
Tighten the thumbscrews on the front panel to secure the server to the rack (2).
Figure 4-2: Aligning the rear end of the server rails with the front
end of the rack rails
After installing the server in the rack, begin the procedure for “Connecting the Peripheral Device
Cables and the Power Cord.”
All manuals and user guides at all-guides.com