HP ProLiant DL140 Server Setup and Installation Guide
24
4
Server Installation
Server Installation Procedures
To install the rack-mounted server into an HP branded rack, complete the procedures described in
the following subsections:
Installing the Rack Rails
Use the following procedures to install the rack rails to the rack:
1.
From the rear of the rack, identify the inside front holes that are used to secure the front tabs
of the fixed rack rail.
IMPORTANT: Ensure that the inner side of the rack rail (rail guide) faces the inside of the
rack.
2.
Carefully align the two front tabs on the front of the fixed rack rail with the holes identified at
the front of the rack.
Figure 4-1: Aligning and inserting the rack rail
3.
Insert the front tabs of the rack rail into the rack.
4.
Compress the rack rail toward the front of the rack until the rear tabs are aligned with the
inner holes at the back of the rack
5.
Insert the rear tabs into the rear holes, and release the rail. The rail should lock in place
securely.
6.
Repeat steps 2 through 6 for the second rack rail.
All manuals and user guides at all-guides.com
