Removal and replacement procedures
33
5.
Remove the PCI-X Hot Plug basket ("Removing the PCI-X Hot Plug basket"
on page
32
).
To replace the component, reverse the removal procedure.
Removing a non-hot-plug expansion board
1.
Power down the server ("Powering down the server" on page
18
).
2.
Extend or remove the server from the rack ("Removing the server from the
rack" on page
19
).
3.
Remove the access panel ("Removing the access panel" on page
19
).
4.
Disconnect any required internal or external cables from the expansion
board.
5.
Open the PCI latch.
6.
Unlock the retaining clip.
