Hardware options installation 70
Store any unused fans as spares.
17.
Install the air baffle (on page
22
).
18.
Install the access panel (on page
21
).
19.
Install the server into the rack ("
Installing the server into the rack
" on page
31
).
20.
Power up the server (on page
18
).
Expansion board option
The server has both full-height and low-profile expansion slots for controller option installation ("
PCIe riser
board slot definitions
" on page
11
).
CAUTION:
To prevent damage to the server or expansion boards, power down the server, and
disconnect all power cords before removing or installing the PCI riser cage.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all expansion slots have either an expansion slot cover or an expansion board installed.
To install the component:
1.
Power down the server (on page
18
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page
18
).
o
Remove the server from the rack (on page
20
).
4.
Remove the access panel (on page
21
).
5.
Remove the PCI riser cage ("
Remove the PCI riser cages
" on page
23
).
6.
Install the expansion board:
Summary of Contents for ProLiant DL388e
