Software and configuration utilities 86
5.
Exit iLO RBSU.
HP recommends using DNS/DHCP with iLO to simplify installation. If DNS/DHCP cannot be used, use the
following procedure to disable DNS/DHCP and to configure the IP address and the subnet mask:
1.
Restart or power up the server.
2.
Press the
F8
key when prompted during POST. The iLO RBSU runs.
3.
Enter a valid iLO user ID and password with the appropriate iLO privileges (
Administer User
Accounts
,
Configure iLO Settings
). Default account information is located on the iLO Default
Network Settings tag.
4.
Select
Network
,
DNS/DHCP
, press the
Enter
key, and then select
DHCP Enable
. Press the
spacebar to turn off DHCP. Be sure that DHCP Enable is set to Off and save the changes.
5.
Select
Network
,
NIC and TCP/IP
, press the
Enter
key, and type the appropriate information in
the IP Address, Subnet Mask, and Gateway IP Address fields.
6.
Save the changes. The iLO system automatically resets to use the new setup when you exit iLO RBSU.
USB support
HP provides both standard USB support and legacy USB support. Standard support is provided by the
operating system through the appropriate USB device drivers. HP provides support for USB devices prior
to the operating system loading through legacy USB support, which is enabled by default in the system
ROM. HP hardware supports USB version 2.0.
Legacy USB support provides USB functionality in environments where USB support is normally not
available. Specifically, HP provides legacy USB functionality at:
•
POST
•
RBSU
•
Diagnostics
•
DOS
•
Environments which do not support USB natively
For more information on ProLiant USB support, refer to the HP website
(
http://www.compaq.com/products/servers/platforms/usb-support.html
).
Diagnostic tools
Survey Utility
Survey Utility, a feature within HP Insight Diagnostics (on page
87
), gathers critical hardware and
software information on ProLiant servers.
This utility supports operating systems that may not be supported by the server. For operating systems
supported by the server, refer to the HP website (
http://www.hp.com/go/supportos
).
If a significant change occurs between data-gathering intervals, the Survey Utility marks the previous
information and overwrites the Survey text files to reflect the latest changes in the configuration.
Survey Utility is installed with every SmartStart-assisted installation or can be installed through the HP PSP
("
ProLiant Support Packs
" on page
88
).
Summary of Contents for ProLiant DL380 Generation 4
Page 98: ...Troubleshooting 98 ...
Page 104: ...Troubleshooting 104 ...
Page 110: ...Regulatory compliance notices 110 Power cord statement for Japan ...
