Hardware options installation 48
3.
Install the hard drive.
4.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations (on page
20
).
Removing a hot-plug SAS hard drive
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
1.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations (on page
20
).
2.
Back up all server data on the hard drive.
3.
Remove the hard drive.
Installing a diskette drive
NOTE:
This procedure shows images of the SCSI model server, but it also applies to the SAS model server.
Summary of Contents for ProLiant DL380 Generation 4
Page 98: ...Troubleshooting 98 ...
Page 104: ...Troubleshooting 104 ...
Page 110: ...Regulatory compliance notices 110 Power cord statement for Japan ...
