HP ProLiant DL360 Gen10 Maintenance And Service Manual Download Page 69

Page: 69 / 112

Disconnect each power cord from the power source.

Disconnect each power cord from the server.

Do one of the following:

a. Extend the server from the rack

b. Remove the server from the rack

4. Remove the access panel

Remove drives and drive blanks.
Note where each drive is located.

Disconnect all cables from the drive backplane.

Remove the drive cage.

To replace the component, reverse the removal procedure.

Removing and replacing the 4LFF drive backplane

Procedure

1. Power down the server

Remove all power:

Disconnect each power cord from the power source.

Disconnect each power cord from the server.

Do one of the following:

a. Extend the server from the rack

b. Remove the server from the rack

4. Remove the access panel

Remove all drives and drive blanks.
Note where each drive is located.

Disconnect all cables from the drive backplane.

Remove the drive backplane.

Removing and replacing the 4LFF drive backplane

Summary of Contents for ProLiant DL360 Gen10

















































































































Search results

Summary of Contents for ProLiant DL360 Gen10

Reviews:

Related manuals for ProLiant DL360 Gen10

Brands by name

Popular brands

HP ProLiant DL360 Gen10, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant DL360 Gen10

Reviews:

Related manuals for ProLiant DL360 Gen10

Brands by name

Popular brands