HP ProLiant DL360 Gen10, Maintenance And Service Manual

Page: 50 / 112

To replace the component, reverse the removal procedure.
Removing and replacing a GPU in the primary riser
Procedure
1. Observe the following warning:
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
2. Power down the server .
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
5. Remove the access panel .
6. Remove the riser cage .
7. If needed, disconnect the GPU power cable and then remove the GPU from the riser.
50 Removing and replacing a GPU in the primary riser