HP ProBook 6450b User Manual Download Page 94

Page: 94 / 181

Using HP 3D DriveGuard software

The HP 3D DriveGuard software enables you to perform the following tasks:

●

Enable and disable HP 3D DriveGuard.

NOTE:

Permission to enable or disable HP 3D DriveGuard is dependent on certain user

privileges. Members of an Administrator group can change privileges for non-Administrator users.

●

Determine whether a drive in the system is supported.

To open the software and change settings, follow these steps:

In Mobility Center, click the hard drive icon to open the HP 3D DriveGuard window.

– or –

Select

Start

Control Panel

Hardware and Sound

HP 3D DriveGuard

NOTE:

If prompted by User Account Control, click

Yes

Click the appropriate button to change settings.

Click

Chapter 6 Drives

Summary of Contents for ProBook 6450b






















































































































































































Search results

Summary of Contents for ProBook 6450b

Reviews:

Related manuals for ProBook 6450b

Brands by name

Popular brands

HP ProBook 6450b, User Manual

Search results

Summary of Contents for ProBook 6450b

Reviews:

Related manuals for ProBook 6450b

Brands by name

Popular brands