Optical drive (select models only)
Your computer may include an optical drive that expands the functionality of the computer. The optical
drive allows you to read data discs, play music, and watch movies.
Identifying the optical drive
▲
Select
Start
>
Computer
.
You will see a list of all the devices installed on your computer, including the optical drive.
Playing a CD, DVD, or BD
1.
Turn on the computer.
2.
Press the release button
(1)
on the drive bezel to release the disc tray.
3.
Pull out the tray
(2)
.
4.
Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up
over the tray spindle.
NOTE:
If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.
5.
Gently press the disc
(3)
down onto the tray spindle until the disc snaps into place.
6.
Close the disc tray.
If you have not yet configured AutoPlay, as described in the following section, an AutoPlay dialog box
opens. It prompts you to select how you want to use the media content.
NOTE:
For best results, be sure that your AC adapter is plugged into an external power source while
playing a BD.
Configuring AutoPlay
1.
Select
Start
>
Default Programs
>
Change AutoPlay settings
.
2.
Confirm that the
Use AutoPlay for all media and devices
check box is selected.
Optical drive (select models only)
53
Summary of Contents for ProBook 6450b
