HP ProBook 4545s Maintenance And Service Manual Download

Page: 49 / 139

Remove the WLAN module

(3)

by pulling the module away from the slot at an angle.

NOTE:

WLAN modules are designed with a notch to prevent incorrect insertion.

NOTE:

If the WLAN antennas are not connected to the terminals on the WLAN module, the

protective sleeves must be installed on the antenna connectors, as shown in the following
illustration.

Reverse this procedure to install the WLAN module.

Optical drive

NOTE:

All optical drive spare part kits include an optical drive bezel and a bracket with mounting

screws.

Description

Spare part number

Blu-ray BD-R/RE DVD±RW SuperMulti DL Drive (includes bracket and screws)

683499-001

Component replacement procedures

Summary of Contents for ProBook 4545s












































































































































Search results

Summary of Contents for ProBook 4545s

Reviews:

Related manuals for ProBook 4545s

Brands by name

Popular brands

HP ProBook 4545s, Maintenance And Service Manual

Search results

Summary of Contents for ProBook 4545s

Reviews:

Related manuals for ProBook 4545s

Brands by name

Popular brands