10.
To remove the top cover, pull up on the top of the top cover
(1)
, pull upward on the left
(2)
and
right sides
(3)
, and then lift the bottom of the top cover
(4)
to remove it enough to access the
card reader cable underneath.
11.
Lift the front of the top cover slightly to gain access to the cable and connector underneath.
12.
Lift the connector latch
(1)
, disconnect the card reader cable
(2)
, and then lift the top cover from
the computer
(3)
.
Reverse this procedure to install the top cover.
Component replacement procedures
63
