Power connector and cable
Description
Spare part number
Power connector and cable
827039-001
Before removing the power cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 33
).
5.
Remove the following components:
a.
Service door (see
Service door on page 34
).
b.
Keyboard (see
Keyboard on page 44
)
c.
Hard drive (
Hard drive on page 35
)
d.
Top cover (see
Top cover on page 49
)
e.
Display assembly (see
Display assembly on page 72
)
Remove the power cable:
1.
Remove the 2 Phillips PM2.5×5.0 screws (1) from the left display hinge.
2.
Rotate the left display hinge upward (2).
3.
Disconnect the cable from the system board (3).
Component replacement procedures
77
