Fingerprint reader assembly
Description
Spare part number
Fingerprint reader assembly (includes cable and bracket)
826380-001
Fingerprint reader insert (part of the Plastics Kit; for use in models without a fingerprint reader)
826386-001
Before removing the fingerprint reader assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 33
).
5.
Remove the following components:
a.
Service door (see
Service door on page 34
).
b.
Hard drive (
Hard drive on page 35
)
c.
Keyboard (see
Keyboard on page 44
)
d.
Top cover (see
Top cover on page 49
)
Remove the fingerprint reader assembly:
1.
Position the top cover upside-down.
2.
Slide the bracket out from under the clips that secure it toward the side of the top cover (1), and then lift
it off the top cover (2).
Component replacement procedures
53
