HP ProBook 430 G3 Maintenance And Service Manual Download Page 13

Page: 13 / 148

Product description

Category

Description

Product Name

HP ProBook 430 G3 Notebook PC

Processors

Intel® Core™ i7 processor, Dual Core, 6th generation (4-MB L3 cache, 15 W)

6500U, 2.6 GHz/3.1 GHz Single Core Turbo

Intel® Core i5 processors, Dual Core, 6th generation (3-MB L3 cache, 15 W)

6300U, 2.4-GHz/3.0-GHz Single Core Turbo processor

6200U, 2.3-GHz/2.8-GHz Single Core Turbo processor

Intel Core i3 processors, Dual Core, 6th generation (3-MB L3 cache, 15 W)

6100U, 2.3-GHz processor/Intel HD Graphics 520

Intel Pentium processor (2-MB L3 cache, 15 W)

4405U, 2.1-GHz processor/Intel HD Graphics 510

Intel Celeron processor (2-MB L3 cache, 15 W)

3855U, 1.6-GHz processor/Intel HD Graphics 510

Chipset

Intel Skylake; integrated with processor

Graphics

Integrated UMA Graphics GT1 and GT2

See processor category.

Panel

33.8-cm (13.3-inch), anti-glare, 1366x768, 220 nits

eDP HD Flat(3.6 mm)/Slim (3.0 mm)

1 or 2 WLAN antennas

1 or 2 WLAN antennas, WWAN, camera

1 or 2 WLAN antennas, camera

Touch panel, 1 or 2 WLAN antennas, camera (Windows 8.1 or Windows 10 only)

Memory

Two customer-accessible memory module slots supporting up to 16 GB of RAM

Supports dual-channel memory

PC3L-12800, 1600-MHz, DDR3L SODIMMs

Supports the following configurations:

●

16384 MB (8192 × 2; dual channel)

●

12288 MB (8192 + 4096; dual channel)

●

8192 MB (8192 × 1)

●

8192 MB (4096 × 2; dual channel)

●

6144 MB (4096 + 2048; dual channel)

●

4096 MB (4096 × 1)

●

2048 MB (2048 × 1)

Summary of Contents for ProBook 430 G3





















































































































































Search results

Summary of Contents for ProBook 430 G3

Reviews:

Related manuals for ProBook 430 G3

Brands by name

Popular brands

HP ProBook 430 G3, Maintenance And Service Manual

Search results

Summary of Contents for ProBook 430 G3

Reviews:

Related manuals for ProBook 430 G3

Brands by name

Popular brands