HP ProBook 430 G3 Maintenance And Service Manual Download Page 119

Page: 119 / 148

To initiate recovery using a Windows 7 operating system DVD:

NOTE:

This process takes several minutes.

If possible, back up all personal files.

Restart the computer, and then insert the Windows 7 operating system DVD into the optical drive before
the Windows operating system loads.

When prompted, press any keyboard key.

Follow the on-screen instructions.

Click Next.

Select Repair your computer.

Follow the on-screen instructions.

After the repair is completed:

Eject the Windows 7 operating system DVD and then insert the Driver Recovery DVD.

Install the Hardware Enabling Drivers first, and then install Recommended Applications.

Performing a system recovery 107

Summary of Contents for ProBook 430 G3





















































































































































Search results

Summary of Contents for ProBook 430 G3

Reviews:

Related manuals for ProBook 430 G3

Brands by name

Popular brands

HP ProBook 430 G3, Maintenance And Service Manual

Search results

Summary of Contents for ProBook 430 G3

Reviews:

Related manuals for ProBook 430 G3

Brands by name

Popular brands