HP ProBook 430 G3 Maintenance And Service Manual Download Page 27

Page: 27 / 148

Bottom

Component

Description

(1)

Battery release latches (2)

Release the battery.

(2)

Battery bay

Holds the battery.

(3)

Vents (3)

Enable airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.

NOTE:

The vents shown in this illustration may vary

depending on your computer model.

(4)

Service door

Provides access to the hard drive bay, the wireless LAN
(WLAN) module slot, the WWAN module slot, the SIM
connector, and the memory module slots.

Bottom

Summary of Contents for ProBook 430 G3





















































































































































Search results

Summary of Contents for ProBook 430 G3

Reviews:

Related manuals for ProBook 430 G3

Brands by name

Popular brands

HP ProBook 430 G3, Maintenance And Service Manual

Search results

Summary of Contents for ProBook 430 G3

Reviews:

Related manuals for ProBook 430 G3

Brands by name

Popular brands