manualshive.com logo in svg

HP ProBook 430 G3, Maintenance And Service Manual, Page: 18 / 148

Share
Download
HP ProBook 430 G3 Maintenance And Service Manual Download Page 18

2

Components

Right

Component

Description

(1)

USB 3.0 ports (2)

Connect an optional USB device, such as a keyboard, mouse, 
external drive, printer, scanner or USB hub.

(2)

HDMI port

Connects an optional video or audio device, such as a high-
definition television, any compatible digital or audio 
component, or a high-speed High Definition Multimedia 
Interface (HDMI) device.

(3)

External monitor port

Connects an external VGA monitor or projector.

(4)

RJ-45 (network) jack/status lights

Connects a network cable.

●

Green (right): The network is connected.

●

Amber (left): Activity is occurring on the network.

(5)

Security cable slot

Attaches an optional security cable to the computer.

NOTE:

The security cable is designed to act as a deterrent, but 

it may not prevent the computer from being mishandled or 
stolen.

6

Chapter 2   Components

Summary of Contents for ProBook 430 G3





















































































































































Reviews:

No comments