HP ProBook 430 G2 User Manual Download Page 58

Page: 58 / 98

Drives

Handling drives

CAUTION:

Drives are fragile computer components that must be handled with care. Refer to the

following cautions before handling drives. Additional cautions are included with the procedures to

which they apply.
Observe these precautions:

●

Before you move a computer that is connected to an external hard drive, initiate Sleep and allow

the screen to clear, or properly disconnect the external hard drive.

●

Before handling a drive, discharge static electricity by touching a grounded surface.

●

Do not touch the connector pins on a removable drive or on the computer.

●

Handle a drive carefully; do not drop a drive or place items on it.

●

Before removing or inserting a drive, shut down the computer. If you are unsure whether the

computer is off, in the Sleep state, turn the computer on, and then shut it down through the

operating system.

●

Do not use excessive force when inserting a drive into a drive bay.

●

Do not type on the keyboard or move the computer while an optical drive is writing to a disc. The

write process is sensitive to vibration.

●

Avoid exposing a drive to temperature or humidity extremes.

●

Avoid exposing a drive to liquids. Do not spray the drive with cleaning products.

●

Remove media from a drive before removing the drive from the drive bay, or traveling with,

shipping, or storing a drive.

●

If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protective

packaging and label the package “FRAGILE.”

●

Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport

walk-through devices and security wands. Airport conveyer belts and similar security devices

that check carry-on baggage use X-rays instead of magnetism and do not damage drives.

Using hard drives

CAUTION:

To prevent information loss or an unresponsive system:

Save your work and shut down the computer before adding or replacing a memory module or hard

drive.
If you are not sure whether the computer is off, turn the computer on by pressing the power button.

Then shut down the computer through the operating system.

48 Chapter 8 Drives

Summary of Contents for ProBook 430 G2



































































































Search results

Summary of Contents for ProBook 430 G2

Reviews:

Related manuals for ProBook 430 G2

Brands by name

Popular brands

HP ProBook 430 G2, User Manual

Search results

Summary of Contents for ProBook 430 G2

Reviews:

Related manuals for ProBook 430 G2

Brands by name

Popular brands