HP ProBook 430 G2 User Manual Download Page 56 | Manualshive

Page: 56 / 98

background image

3.

Press in on the card (1), and then remove it from the slot (2).

NOTE:

If the card does not eject, pull the card out of the slot.

Using a USB device

Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external

device, such as a USB keyboard, mouse, drive, printer, scanner, or hub.
Some USB devices may require additional support software, which is usually included with the

device. For more information about device-specific software, see the manufacturer's instructions.

These instructions may be provided with the software, on disc, or on the manufacturer’s website.
The computer has at least 1 USB port that supports USB 1.0, 1.1, 2.0, or 3.0 devices. Your computer

may also have a USB charging port that provides power to an external device. An optional USB

docking device or USB hub provides additional USB ports that can be used with the computer.

Connecting a USB device

CAUTION:

To reduce the risk of damage to a USB connector, use minimal force to connect the

device.

▲

Connect the USB cable for the device to the USB port.

NOTE:

The following illustration may look slightly different than your computer.

You will hear a sound when the device has been detected.

46 Chapter 7 External cards and devices

«
...
54
55
56
57
58
...
»

Summary of Contents for ProBook 430 G2



































































































Reviews:

No comments

Related manuals for ProBook 430 G2

Brand: Acer Pages: 96

Brand: Medion Pages: 2

Brand: MSI Pages: 102

Atlas KAL14N300HA

Brand: Kogan Pages: 10

Brand: bto Pages: 216

LIFEBOOK T904 Ultrabook

Brand: Fujitsu Pages: 121

Brand: Fujitsu Pages: 129

LIFEBOOK T904 Ultrabook

Brand: Fujitsu Pages: 196

Brand: Fujitsu Pages: 131

Brand: Fujitsu Pages: 392

LifeBook T901 Series

Brand: Fujitsu Pages: 415

Brand: Fujitsu Pages: 2

Brand: Acer Pages: 86

Brand: Gateway Pages: 86

Brand: Clevo Pages: 100

Brand: Clevo Pages: 2

Brand: Clevo Pages: 36

Brand: Clevo Pages: 112

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands