HP ProBook 430 G2 User Manual Download Page 14

Page: 14 / 98

Getting to know your computer

Right

Component

Description

(1)

Audio-out (headphone)/Audio-in

(microphone) jack

Connects optional powered stereo speakers, headphones,

earbuds, or a headset. Also connects an optional headset

microphone. This jack does not support optional

microphone-only devices.

WARNING!

To reduce the risk of personal injury, adjust

the volume before putting on headphones, earbuds, or a

headset. For additional safety information, see the

Regulatory, Safety, and Environmental Notices

. To access

this guide, from the Start screen, type

support

, and then

select the HP Support Assistant app.

NOTE:

When a device is connected to the jack, the

computer speakers are disabled.

NOTE:

Be sure that the device cable has a 4-conductor

connector that supports both audio-out (headphone) and

audio-in (microphone).

(2)

USB 2.0 charging (powered) port

Connects an optional USB device, such as a keyboard,

mouse, external drive, printer, scanner or USB hub.

Standard USB ports will not charge all USB devices or will

charge using a low current. Some USB devices require

power and require you to use a powered port.

NOTE:

USB charging ports can also charge select

models of cell phones and MP3 players, even when the

computer is in Sleep mode.

For details about different types of USB ports, see

Using a

USB device on page 46

(3)

RJ-45 (network) jack/lights

Connects a network cable.

●

Green (right): The network is connected.

●

Amber (left): Activity is occurring on the network.

(4)

AC adapter/Battery light

●

White: The computer is connected to external power

and the battery is charged from 90 to 99 percent.

●

Amber: The computer is connected to external power

and the battery is charged from 0 to 89 percent.

Chapter 2 Getting to know your computer

Summary of Contents for ProBook 430 G2



































































































Search results

Summary of Contents for ProBook 430 G2

Reviews:

Related manuals for ProBook 430 G2

Brands by name

Popular brands

HP ProBook 430 G2, User Manual

Search results

Summary of Contents for ProBook 430 G2

Reviews:

Related manuals for ProBook 430 G2

Brands by name

Popular brands