Some mobile network operators require the use of a SIM. A SIM contains basic information about
you, such as a personal identification number (PIN), as well as network information. Some computers
include a SIM that is preinstalled in the battery bay. If the SIM is not preinstalled, it may be provided
in the HP Mobile Broadband information provided with your computer or the mobile network operator
may provide it separately from the computer.
For information about inserting and removing the SIM, see
Inserting and removing a SIM
on page 20
in this chapter.
For information about HP Mobile Broadband and how to activate service with a preferred mobile
network operator, see the HP Mobile Broadband information included with your computer.
Inserting and removing a SIM
CAUTION:
To prevent damage to the connectors, use minimal force when inserting a SIM.
To insert a SIM, follow these steps:
1.
Turn off the computer by using the Shut down command.
2.
Close the display.
3.
Disconnect all external devices connected to the computer.
4.
Unplug the power cord from the AC outlet.
5.
Turn the computer upside down on a flat surface, with the battery bay toward you.
6.
Remove the battery (see
Removing a battery on page 41
).
7.
Remove the service door (see
Removing the service door on page 49
).
8.
Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
NOTE:
The SIM in your computer may look slightly different from the illustration in this section.
NOTE:
See the image on the SIM slot to determine which way the SIM card should be inserted
into your computer.
9.
Replace the service door (see
Replacing the service door on page 49
).
10.
Insert the battery (see
Inserting a battery on page 41
).
NOTE:
HP Mobile Broadband will be disabled if the battery is not replaced.
20 Chapter 3 Connecting to a network
Summary of Contents for ProBook 430 G2
Page 1: ...User Guide ...
Page 4: ...iv Safety warning notice ...
