HP Pavilion dm4-3000 User Manual Download Page 60

Page: 60 / 121

Testing an AC adapter

Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to
AC power:

●

The computer does not turn on.

●

The display does not turn on.

●

The power lights are off.

To test the AC adapter:

Shut down the computer.

Remove the battery from the computer.

Connect the AC adapter to the computer, and then plug it into an AC outlet.

Turn on the computer.

●

If the power lights turn

, the AC adapter is working properly.

●

If the power lights remain

off

, check the connection from the AC adapter to the computer

and the connection from the AC adapter to the AC outlet to make sure the connections are
secure.

●

If the connections are secure and the power lights remain

off

, the AC adapter is not

functioning and should be replaced.

Contact customer support for information on obtaining a replacement AC power adapter.

Chapter 7 Power management

Summary of Contents for Pavilion dm4-3000


























































































































Search results

Summary of Contents for Pavilion dm4-3000

Reviews:

Related manuals for Pavilion dm4-3000

Brands by name

Popular brands

HP Pavilion dm4-3000, User Manual

Search results

Summary of Contents for Pavilion dm4-3000

Reviews:

Related manuals for Pavilion dm4-3000

Brands by name

Popular brands