HP Pavilion dm4-3000 User Manual Download

Page: 108 / 121

The computer does not detect the disc drive

If Windows does not detect an installed device, the device driver software might be missing or
corrupted. If you suspect that the optical drive is not being detected, verify that the optical drive is
listed in the Device Manager utility by:

Removing any discs from the optical drive.

Selecting

Start

Control Panel

System and Security

In the

System

area, clicking

Device Manager

In the Device Manager window, clicking the arrow next to DVD/CD-ROM drives to expand the
list to show all of the installed drives.

Right-clicking the optical device listing to perform the following tasks:

●

Update the driver software

●

Disable

●

Uninstall

●

Scan for hardware changes. Windows scans your system for installed hardware and installs
any required drivers

●

Click

Properties

to verify that the device is working properly

◦

The Properties window provides details about the device to help you troubleshoot
issues

◦

Click the

Driver

tab to update, disable, or uninstall drivers for this device

Appendix A Troubleshooting and support

Summary of Contents for Pavilion dm4-3000


























































































































Search results

Summary of Contents for Pavilion dm4-3000

Reviews:

Related manuals for Pavilion dm4-3000

Brands by name

Popular brands

HP Pavilion dm4-3000, User Manual

Search results

Summary of Contents for Pavilion dm4-3000

Reviews:

Related manuals for Pavilion dm4-3000

Brands by name

Popular brands