HP Pavilion dm4-3000 User Manual Download

Page: 39 / 121

Scrolling

Scrolling is useful for moving up, down, or sideways on a page or image. To scroll, place two fingers
slightly apart on the TouchPad, and then drag them across the TouchPad in an up, down, left, or right
motion.

NOTE:

Scrolling speed is controlled by finger speed.

NOTE:

Two-finger scrolling is enabled at the factory.

Pinching/Zooming

Pinching allows you to zoom in or out on images or text.

●

Zoom in by placing two fingers together on the TouchPad, and then moving them apart.

●

Zoom out by placing two fingers apart on the TouchPad, and then moving them together.

NOTE:

Pinching/zooming is enabled at the factory.

Using pointing devices

Summary of Contents for Pavilion dm4-3000


























































































































Search results

Summary of Contents for Pavilion dm4-3000

Reviews:

Related manuals for Pavilion dm4-3000

Brands by name

Popular brands

HP Pavilion dm4-3000, User Manual

Search results

Summary of Contents for Pavilion dm4-3000

Reviews:

Related manuals for Pavilion dm4-3000

Brands by name

Popular brands