HP P4535A - Web Cache Server Appliance Administrator'S Manual Download Page 228

Page: 228 / 251

216

Appendix D

Configuration Files

The

snmpTargetAddrEntry

line defines the host,

host_a

, which has the IP address

A.B.C.D

. The

communityEntry

line defines the community

OneHost

, which contains the host

host_a

. The

vacmAccessEntry

and

vacmSecurityToGroupEntry

lines allow access to the community

OneHost

To allow MIB access to one subnet named

OneNet

, enter the following lines in the configuration file:

The

snmpTargetAddrEntry

line defines the subnet,

net_a

, which has the IP address

A.B.C.xxx

. The

communityEntry

line defines the community

OneNet

, which contains the subnet

net_a

. The

vacmAccessEntry

and

vacmSecurityToGroupEntry

lines allow access to the community

OneNet

socks.config

The

socks.config

file specifies which origin servers you want Traffic Server to access directly without

going through the SOCKS server.

Format

Each line in the

socks.config

file can consist of a maximum of 400 characters. Any line not containing

no_socks

as the first string will be ignored. Any line containing

no_socks

as the first string must follow the

format below:

no_socks IPaddresses_or_IPaddress_range

where

IPaddresses_or_IPaddress_range

is a comma separated list of the IP addresses or IP address

ranges associated with the origin servers you want Traffic Server to access directly.

Example

The following example configures Traffic Server to access the origin server associated with the IP address

11.11.11.1

directly without going through the SOCKS server.

no_socks 11.11.11.1

The following example configures Traffic Server to access the origin servers associated with the range of IP
addresses

123.14.15.1 - 123.14.17.4

and the IP address

113.14.18.2

directly without going through

the SOCKS server.

no_socks 123.14.15.1 - 123.14.17.4, 113.14.18.2

NOTE

Use the netmask

255.255.255.0

for the subnet

A.B.C.xxx

in the

snmpTargetAddrEntry

definition.

snmpTargetAddrEntry 34 snmpUDPDomain A.B.C.0:0 100 3 net_a v1ExampleParams
nonVolatile 255.255.255.0:0

communityEntry localSnmpID public OneNet localSnmpID default net_a nonVolatile

vacmAccessEntry OneNet - snmpv1 no AuthNoPriv exact All - All nonVolatile

vacmSecurityToGroupEntry snmpv1 public OneNet nonVolatile

IMPORTANT

After you modify

socks.config

, Traffic Manager has to reread the configuration

files. Run the

traffic_line -x

command. If you are running a cluster, you need only

run the command for one node; the changes will propagate.

Summary of Contents for P4535A - Web Cache Server Appliance




























































































































































































































































Search results

Summary of Contents for P4535A - Web Cache Server Appliance

Reviews:

HP P4535A - Web Cache Server Appliance, Administrator'S Manual, Page: 228 / 251

Search results

Summary of Contents for P4535A - Web Cache Server Appliance

Reviews: