HP P 1981 A, Installation Manual

Page: 8 / 36

4 English
Removing the Rear Cover
When making cable connections to the HP Wireless LAN Access Point, first remove
the rear cover from the device. To remove the cover:
1 Take the front of the device in
one hand and the rear cover in
your other hand.
2 Press in the release latches on
both sides of the rear cover.
3 Pull the unit away from the
rear cover until the release
latches come out of the rear
cover.
4 Lift up the device to
disconnect it from the rear
cover.
NOTE
Write down the ID code of your HP Wireless LAN Access Point. The code later can
be found on a small label at the rear of the device. You will need this ID code if you
want to make any changes to the settings of your network.
release catches
rear cover unit
ap-us.book Page 4 Thursday, November 16, 2000 10:36 AM