HP P 1981 A, Installation Manual

Page: 7 / 36

English 3
Chapter 2 - Hardware Installation
This chapter describes how to install a Wireless LAN network.
Before You Start
Before beginning a network installation, read the following information:
CAUTION
Once you have supplied power to the HP Wireless LAN Access Point, do not cover the
device or block the airflow to the device with any other objects. Ensure that the device
is not exposed to high temperatures or high levels of humidity.
Placing Your HP Wireless LAN Access Point
Before beginning network installation, it is recommended that you follow these
guidelines:
• Position the device as centrally as possible to the computers that will be in the
wireless network
• Place the device next to a power outlet that can be easily reached by the power
cord
• If you are planning to connect your Wireless LAN Access Point to a phone line,
ensure that the phone outlet is close to the device
• If you are planning to connect external equipment to the Ethernet port of your
Wireless LAN Access Point, ensure that the equipment is close to the device.
Cleaning Your HP Wireless LAN Access Point
To maintain the functionality of your HP Wireless LAN Access Point, always keep the
device as clean as possible. The device can be cleaned with a soft tissue. Avoid the
use of abrasive cleaning materials or aggressive liquids such as alcohol.
ap-us.book Page 3 Thursday, November 16, 2000 10:36 AM